Architects & Engineers

Specifying Resources

CAD & BIM Drawings

 

 

 

ZOO Fans H Series for Open Ceiling Structures

BIM Drawing Files (Revit)

Instructions for use of Revit families:

2011 RFA Format compatible with 2011, 2012, 2013 and 2014 Revit Architecture, Structure, MEP.

  • Use the “Offset” instance property to adjust the height of the fan from the floor.
  • Use the “Material color” type property to change the rendering color of the fan.
  • Use the “Angle Adjustment” type property to change the angle of the fan.

 

H30 BIM

 

IGEs 3D Files



 

PDF CAD Drawings



 

DWG CAD Drawings



 

 

ZOO Fans IC Series for Drop Ceiling Structures

BIM Drawing Files (Revit)

Drop-In Series for Drop Ceiling Instructions for use of Revit

2011 RFA Format compatible with 2011, 2012, 2013 and 2014 Revit Architecture, Structure, MEP.

When inserting family file into project, click on “place on workplane” button.
Use the “Offset” instance property to adjust the height of the fan from the floor.
As an alternative, you can place the family onto a ceiling by clicking “place on face” button.
If you place it onto a ceiling surface, make sure to click the “flip workplane” button so that the family is not upside down.

IC20-revit

Universal Series for Drop Ceiling Instructions for use of Revit Families:

2011 RFA Format compatible with 2011, 2012, 2013 and 2014 Revit Architecture, Structure, MEP.

  • Open the rvt file, select a group and copy to clipboard (ctrl+C)
  • Open your Revit project and paste the group into it (ctrl+V)
  • Once the group is pasted, you can either edit the group or ungroup the elements. You can also move the fan locations and air terminals.

    Note that each IC fan kit comeds with a total of 3′-0″ of flex duct. Make sure you do not exceed this amount (including the 90° bends) when adjusting the locations of the air terminals.

IC-Series

 

IGEs 3D Files





 

PDF CAD Drawings









 

DWG CAD Drawings